Panda 6-string Short Scale Bass

$859.00

This is a brand new Panda 6-String Short Scale Bass by Phred Instruments with a brass nut. Features a neck through construction with ash body sides. 3 band EQ powered by a 9-Volt battery, with a Main Volume knobs, and blend knob for the neck and bridge pickup. Quick specs: Weight 11.5 pounds. 30.75″ scale length. 2.125″ nut width. 3.5″ neck width at 24th fret. Active EQ. Tuned to BEADGB.

Panda Bass guitars are built in limited production runs. Get notifed about the next production run by clicking on the button below.

This is a brand new Panda 6-String Short Scale Bass by Phred Instruments with a brass nut.

Features a neck through construction with ash body sides. 3 band EQ powered by a 9-Volt battery, with a Main Volume knobs, and blend knob for the neck and bridge pickup.

Quick specs:

Weight 11.5 pounds

30.75″ scale length

2.125″ nut width

3.5″ neck width at 24th fret

Active EQ

Tuned to BEADGB

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

13-point Setup

Our 13-point setup and inspection ensures that every PHRED Instruments guitar we ship is professionally setup and ready to play when it’s delivered to you. Setup will include string-height adjustment, intonation, electronics inspection, and the frets are leveled, crowned, and polished, as outlined below.


Fretwork and Fingerboard

1. Debur Fret Edges
This process involves filing the edges of each fret such that the edge of the fretboard feels smooth as you play up and down the neck.
2. Level Frets
Leveling all the frets ensures that you can play at low string action and with clear and articulated notes on each fret.
3. Crown Frets
After leveling the frets, they are crowned. Crowning frets is a process by which the frets are rounded slightly at the top. This makes the frets feel nice and smooth all around, ensures smooth bends, and also makes it easy to slide up and down the fretboard.
4. Polish Frets
After crowning the frets, polishing makes them shine brightly. Polishing them also makes them even more smooth to the touch.
5. Condition the fingerboard
The fretboard wood is cleaned and conditioned using fretboard oil.


Setup

6. Adjust Truss Rod
The truss rod should be adjusted such that the neck is slightly concave.
7. Adjust Nut
The nut height is adjusted to the fingerboard, and the string slots are filed to a perfect height and width for the strings we install
8. Adjust the Bridge Height
As a part of setting the string action, the bridge height is adjusted to our standard measurement of 1.75mm above the 12th fret on the low E string, and 1.5mm above the 12th fret on the high E string. We leave a little bit of room if you want to adjust the bridge a bit lower than that.
9. Adjust the Bridge Saddles
Intonation is set by adjusting the bridge saddles. We tune up and stretch a fresh set of strings, and then adjust the bridge saddle position until the harmonic at the 12th fret compared to the note at the 12th fret.


Pickups

10. Adjust pickup height
The height of the pickup is adjusted such that the perceived volume is consistent between each of the pickups installed on the guitar.


Electronics

11. Inspect and test electronics
Whether you upgrade to our USA wiring option or go with the stock wiring and electronics, we are going to make sure all the electronics work properly prior to shipping. For guitars that have an OBEL jack, we wire it Tip=Send, Ring=Return.


Strings

12. Install D’Addario 10-46 gauge strings
We install D’Addario EXL 10-46 gauge strings on all guitars. If you prefer a different brand or string gauge, contact us and we can accommodate other brands and string gauges, and adjust the setup accordingly to the strings that you prefer to use.


Guitar Body & Hardware

13. Clean and polish the guitar body and hardware
Just before we package up a guitar for shipping, we clean and polish your guitar using StewMac Guitar Polish to make it shine.

Contact Us

    Body
    Body Style Neck Through
    Body Wood North American Ash
    Neck
    Scale Length 30 3/4"
    Frets 24 Medium Jumbo
    Neck Wood 5-ply, Maple & Walnut
    Neck Binding White with Black Dots
    Fretboard Wood Ebony
    Fretboard Inlays Pearloid Dot
    Neck Stabilization Double-Expanding Truss Rod
    Nut Width 1.797"
    Nut Material Brass
    Headstock
    Tuning Machines Unbranded Stock Tuners
    Hardware
    Bridge Style Hardtail Bridge
    Control Knobs and Toggles
    Volume Knob(s) 1 Main Volume Knob
    Pickup Toggle Blend Knob
    Electronics and Wiring
    Pre-amp / Buffer 3-Band EQ (Requires 9V Battery)
    Battery Box Yes (9V Battery Included)
    Output
    Output Jack(s) 1 Standard Mono Guitar Output Jack
    Output Jack(s) Notes Plugging a guitar cable into the mono guitar output jack powers on the 3-Band EQ.
    Other Specs
    Guitar Strings Stock Factory Strings